How Professionals Perform Ceiling Fan Installation

Local Electrical Project Experts

The ceiling fan can help you be comfortable in the house during hot weather at a cheaper cost than other types of cooling devices. Ceiling fan installation need not stress you. There are professionals ready to do it for you. You could ask technicians to install the fan for you but you could be curious about how they do it. To quench your curiosity, here is a brief look at how the professionals carry out fan installation.

The professional decides on the best location to place the fan. The most probable place you would find a fan is the center of the room where it will serve most parts of the room. If there is a light fixture already installed, it must be replaced.

You will have to provide sufficient power to run the fan. If possible, your fan installation will need a new circuit complete with its own circuit breaker from the mains. However, a ceiling fan does not require additional power.

The technician must have some essential tools and materials to complete your ceiling fan installation successfully. Apart from the ceiling fan itself, you will need a mounting kit, lock washers, patented support unit, octagon electrical box, cable, outlet box, switch, box connectors, wire nuts, switch cover, bonding screw, neon test light, screwdriver, claw hammer, slotted screwdriver, speed controller, pliers, wallboard or compass saw, stud locator, ladder, electrician’s pliers, wire-stripper, cable-ripper and a surface-wiring system.

You will have to buy some of these, such as the cables, the fan, and the wires, while the technician will come with his tools of trade. The technician might have to switch off the power to work on the electric fixtures to avoid exposure to electric shock.

Once you have decided where the fan should be, let the technician measure the center of the ceiling. Ensure the technician gives the fan support with the help of the building structure if it weighs more than 35 pounds. This will also support the fan when there is heavy vibration.

You could suggest an extender if the ceiling is too high. You should also ensure that the technician remembers to ground the fan towards the end of the ceiling fan installation.
Test to see that the fan does not wobble if the problem persists, it could be because of unbalanced blades. The professional could try interchanging the adjacent blades.

Ask the technician to do the ceiling fan installation by wiring it through a speed control to enable you operate the speed of the fan. The wiring should conform to electric guidelines set by the Electrical Code, which you can find at the nearby library.  Because of the danger of electrocution, you should let the professional work on this part alone using his tools, such as a tester.

Are you still not satisfied with these instructions? Get the complete step-by-step instruction on how to do ceiling fan installation by visiting the ultimate DIY site Handyman Matters.

Electrical Services

Pin It on Pinterest