Taking Care of Your Car’s Cooling System in Oklahoma City

Today’s modern engines generate a great deal of heat as they run. In fact, it is not uncommon for an engine’s operating temperature to reach 195 degrees Fahrenheit and this is not too far from the boiling point (212 degrees F). Your cooling system needs to stay clean and in good condition for the best engine performance and fewer problems. Here are some important tips from your car care service in Oklahoma City, to help you keep your engine running cool and performing its best.

The Importance of Coolant

When you check engine oil, make sure the coolant is full. You should see coolant at the “full line” on the coolant reservoir. If you need to add coolant, make sure to use the right type for your engine. Some coolants are green, orange, and purple, and you should never mix them, or you could damage your car’s cooling system.

If the coolant level is low, you may have a leak. It is important to find the leak and fix it before it gets worse. Otherwise, you run the risk of overheating your engine and this can bring on a host of mechanical problems like blown head gaskets and cracked blocks.

Modern coolant eventually breaks down and gets dirty. Follow the engine manufacturer recommendation for coolant changes. When you change coolant, it is a good idea to ask your car care service in Oklahoma City to flush the entire cooling system. This removes sediments which attack your cooling system.

Cooling System Components

When checking engine oil, look at the hoses and belts. Look for cracks or splits. Grab hoses to see if they are stiff, but do not touch hot hoses. To make sure you have few problems, visit your car care service in Oklahoma City for seasonal cooling system maintenance.

Pin It on Pinterest

Shares